Archive for February, 2010

TRENDnet USB to Serial Converter TU-S9

  • Product Type – Converter
  • Warranty – 2 years
  • OS Compliant – Windows 98SE/ME/2000/2003/XP
  • Cable Length – 6.9 cm (27 inches)

Product Description
This USB to Serial converter allows you to connect a RS-232 serial device such as a modem to a USB port on your Desktop or Laptop PC…. More >>

TRENDnet USB to Serial Converter TU-S9

Incoming search terms:

5 comments - What do you think?  Posted by xamoeba - February 26, 2010 at 9:41 am

Categories: USB   Tags: , , , , , , , , , , , , , , , , ,

Samsung CLP-510 Counters Reset Code

This is Samsung CLP-510 Counters Reset Code Review. Here a comprehensive guide how to reset all counters in the Samsung CLP-510:
Toner image counter, imaging unit, fuser, transfer roller, transfer belt. All you need is 3 pieces of wire!

1) Resetting toner chips:
Use the SSEBR Chip resetting program on www.dunfield.com/clp510. You need a PC with an LPT-Port, a DOS-boot disk, his DOS-program and 3 small wires.
He also has instructions for the waste toner bin. (There are various posts on that topic.)

2) Resetting belt chip: Also use the SSEBR Chip program, it is the same 24C04 IC as used by the toner. Looking at the bottom of the belt cartridge, connectors facing you, here are the relevant pins on the oval connector:
_________
|(ABCxxxx)|
|———|
.\________|

On the bottom left is the cut off corner of the black connector plate – just so that you are holding it right. ;-)

Connect the cables as follows:
A = Data = LPT pin 16
B = Clock = LPT pin 17
C = Ground = LPT pins 20-25 (any of these pins)

First backup the chip with the option “SSEBR /B belt”.
Then reset with the option “SSEBR /Z”

3) Resetting the imaging unit, fuser and all rollers:

Start up the machine with push in the buttons “online” and “cancel”
–You will see the message “Download mode press online key”
Press about 15 times the “menu” key
–You will see the message “Uncheck consumable mode”
Press about 15 times “menu” and 5 times “enter”
–You will see “Press access key”
Press a few enters
Press 3 times “cancel”
Go to the EDC mode
– you will see “press access key”
Press “cancel”
Go to maintenance and initialize the parts you like to reset.
(sometimes you have to try a few times; don’t wait to long in between the steps!)

Incoming search terms:

36 comments - What do you think?  Posted by xamoeba - February 7, 2010 at 2:00 am

Categories: Uncategorized   Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Samsung SGH-i780

samsung-sgh-i780

samsung-sgh-i780

This is Samsung SGH-i780 Review. Finally, the Samsung SGH-i780 is a “PDAphone” particularly well served in terms of connectivity, it offers a USB 2.0 connection, a Bluetooth 2.0, a location for a map and especially MicroSD compatible wireless standard 802.11 b / g.

Read more…

Incoming search terms:

Be the first to comment - What do you think?  Posted by xamoeba - at 1:58 am

Categories: Uncategorized   Tags: , , , , , , , , ,

Next Page »